With the rapid development of the economy, many years of experience in the production and sales of automatic tapping machines and pneumatic tapping machines, summed up three common troubleshooting methods for tapping machines after sales:
First of all, the first step is to review the relay (function: automatic adjustment, conversion circuit, etc.) of the automatic tapping (tool: tap or tap) machine. Here are the control valves for flow (unit: cubic meters per second) and pressure control valve. Fully automatic tapping machine is an automatic production equipment, which is divided into fully automatic and semi-automatic. The device belongs to the field of thread forming machinery. Advantages of the device. Advantages; reduce the work intensity of workers, improve tapping efficiency, and ensure the safety of workers. In long-term use, the relay will stick to the grounding iron, and then there will be looseness. If so, clean it up and handle the normal route of the circuit system!
The second point: Before using the automatic tapping (tool: tap or tap) machine, we should check his reference point and analyze the three clamped chucks. Since the tapping machine was introduced to the market, it has been deeply loved by users because of its lightness, flexibility, high efficiency and irreplaceable advantages of other similar equipment. It avoids the limitations of lathes, drilling machines or manual tapping, saves time and effort, is not easy to rot teeth, and the tap is not easy to break, etc. Its remarkable features are widely praised and adopted by users.
The third point: when the tapping machine is working, as long as the blank parts are put into the hopper, the material can be automatically fed, automatically positioned, automatically clamped, automatically tapped, and automatically unloaded. One worker can operate multiple equipment at the same time, and the production efficiency High, can significantly save labor costs! High-quality tapping machine has the characteristics of novel design, reasonable structure, easy to use, high degree of automation, easy to use, high efficiency, maintenance-free, high cost performance, etc. All kinds of nuts have high thread finish and high qualified rate of finished products.
If the free inspection is different from the requirements on the drawings, then we have to conduct further inspections. In the case of clamping, if there is a gap, we can close them with our fingers, and his benchmark will not deviate at this time. Fully automatic tapping machine he has to meet the free benchmark inspection.
If you have any other questions, you can contact us, our email address is Nina.email@example.com.